Kitchen Chimney Repair & Service

Faber Chimney Repair Service at Your Doorstep

Looking for Faber Chimney Repair Service? If your kitchen chimney has stopped working, lost suction, or is making unusual noise, Faber Appliance Repair can help. Call or WhatsApp us to book a technician visit for chimney inspection, repair and maintenance at your home — with service available across India.

Faber Appliance Repair is an independent appliance repair and service provider and is not an authorised or official Faber service centre.

Faber Chimney Repair Service technician repairing a kitchen chimney in a modern Indian kitchen
Common Issues

Chimney Problems We Repair

Our Faber Chimney Repair Service technicians handle a wide range of kitchen chimney issues, including:

Chimney Not Starting

The chimney doesn't power on at all, often linked to electrical or switch issues.

Chimney Not Turning On

Power reaches the unit but it fails to respond to controls.

Low Suction

The chimney runs but pulls in noticeably less smoke and odour than before.

No Suction

The fan runs but there is little to no airflow being drawn in.

Unusual Noise

Rattling, grinding or humming sounds during operation.

Motor Problems

Motor overheating, stalling, or not running smoothly.

Fan Problems

Fan blades not spinning correctly or spinning unevenly.

Touch Panel Problems

Touch controls not responding or responding incorrectly.

Button / Control Problems

Physical buttons or dials that are stuck or unresponsive.

Auto-Clean Problems

The auto-clean cycle not starting, not completing, or leaving residue.

Filter Blockage

Grease-clogged filters that restrict airflow and reduce suction.

Electrical / Wiring Issues

Loose connections, tripping switches, or wiring faults.

Chimney Light Problems

LED or halogen lights that flicker or don't turn on.

Smoke Not Extracted Properly

Smoke and odour lingering in the kitchen despite the chimney running.

Our Services

Chimney Repair Services

Every Faber Chimney Repair Service visit is built around identifying the exact issue before any repair is carried out. Here's what we cover:

A. Chimney Motor Repair

Our technicians inspect the chimney motor to identify issues such as overheating, unusual sound, or failure to start, and carry out repair or replacement as needed based on the diagnosis.

B. Chimney Fan Repair

We check the fan blades and assembly for damage, misalignment or wear that can reduce airflow, and repair or realign them where required.

C. Chimney Suction Repair

Weak or absent suction can come from several sources. We inspect the filter, motor, fan and ducting to narrow down the cause before recommending a repair.

D. Chimney Auto-Clean Repair

For chimneys with an auto-clean function, we check the auto-clean mechanism and controls if the cycle isn't completing properly or isn't clearing grease effectively.

E. Chimney Filter Cleaning

Grease buildup on filters is one of the most common causes of reduced suction. We clean or recommend replacement of filters that are heavily clogged.

F. Chimney Touch Panel & Control Repair

We inspect unresponsive touch panels, buttons and control boards, and repair or replace faulty control components.

G. Chimney Electrical Repair

Our technicians check wiring, connections and switches for faults that can affect chimney power or safety.

H. Chimney Inspection & Maintenance

Regular inspection helps catch small issues — like early grease buildup or minor motor wear — before they turn into bigger repairs.

Understanding the Problem

Why Chimney Suction Becomes Weak

Weak suction is one of the most common chimney complaints, and it can have more than one cause, including:

  • Dirty filters — grease-coated filters restrict airflow.
  • Grease buildup inside the chimney body or ducting.
  • Blocked ducting that prevents smoke from being expelled properly.
  • Fan or motor problems that reduce pulling power.
  • Installation or airflow issues, such as incorrect ducting length or bends.
  • Internal component wear that develops over time with regular use.

Because several of these causes can look similar from the outside, a proper on-site inspection is the best way to identify the exact cause before any repair is carried out.

Chimney Motor & Fan Assembly Repair

Our technician opens up the motor and fan assembly to inspect for wear, overheating or misalignment, and carries out repair based on what's found.

Technician repairing an opened chimney motor and fan assembly
Faber chimney motor repair in progress

Chimney Suction & Airflow Check

We check suction strength and airflow at the hob level to help pinpoint whether the issue lies with the filter, fan, motor or ducting.

Technician checking chimney suction and airflow in a kitchen
Checking chimney suction and airflow

Chimney Auto-Clean Service

For auto-clean chimneys, our technician inspects the auto-clean cycle and mechanism to address incomplete cleaning or cycles that don't start.

Technician servicing the auto-clean system of a kitchen chimney
Servicing the chimney's auto-clean system

Chimney Filter Cleaning

Grease-clogged filters are removed, cleaned and reinstalled — or replaced when they're too worn to clean effectively — to help restore suction.

Technician cleaning a greasy kitchen chimney filter
Cleaning a grease-clogged chimney filter
How It Works

Chimney Repair Process

  1. Contact Us

    Call or WhatsApp Faber Appliance Repair.

  2. Describe the Issue

    Tell us what's wrong with your chimney.

  3. Technician Visit

    A technician inspects the chimney at your home.

  4. Recommendation

    We explain the issue and the repair needed.

  5. Testing

    The chimney is tested after service is complete.

Why It Helps

Service Benefits

  • ✓Professional on-site inspection
  • ✓Doorstep service at your home
  • ✓Chimney-specific troubleshooting
  • ✓Repair and maintenance support
  • ✓Transparent communication throughout
  • ✓Service for common chimney issues
  • ✓Pan-India service availability

Completed Chimney Service

Once repair or servicing is complete, the chimney is tested to confirm it's working before the technician wraps up the visit.

Technician completing chimney service in a modern Indian kitchen
Chimney service completed at the customer's home
About Us

Why Choose Faber Appliance Repair

Chimney-Focused Support

We work specifically on chimney-related problems, from motors to auto-clean systems.

Doorstep Service

Technicians come to your home to inspect and repair your chimney.

Professional Technicians

Technicians experienced with common kitchen chimney issues.

Common Issue Coverage

From low suction to touch panel faults, we address a wide range of chimney problems.

Easy Contact

Reach us quickly by phone call or WhatsApp message.

Pan-India Coverage

Service availability across locations in India.

Faber Appliance Repair is an independent appliance repair service and is not an authorised or official Faber service centre. Our Faber Chimney Repair Service is available across India.

Need Chimney Repair Service?

Contact us for Faber Chimney Repair Service — kitchen chimney inspection, repair and service, at your doorstep.

Book a Visit

Request a Chimney Repair Callback

Submitting this form opens WhatsApp with your details filled in so our team can respond directly.

FAQs

Frequently Asked Questions

How do I know if my chimney needs repair?
Common signs include weak or no suction, unusual noise during operation, the chimney not turning on, lingering smoke or odour in the kitchen, or unresponsive touch panel controls.
Why is my kitchen chimney suction weak?
Weak suction is usually caused by a dirty filter, grease buildup, blocked ducting, or a fan/motor issue. An on-site inspection is the best way to confirm the exact cause.
Can you repair a chimney motor?
Yes. Our technicians inspect the motor for issues such as overheating or failure to start, and carry out repair based on the diagnosis.
Do you provide chimney auto-clean repair?
Yes, we service auto-clean chimneys where the cleaning cycle isn't starting, isn't completing, or isn't clearing grease properly.
Can you clean a blocked chimney filter?
Yes, we clean grease-clogged filters, and can advise on replacement if a filter is too worn to clean effectively.
Why is my chimney making noise?
Unusual noise is often related to fan or motor wear, loose components, or an obstruction. A technician visit can help identify the source.
Can a chimney touch panel be repaired?
Yes, unresponsive touch panels and control boards can often be repaired or replaced after inspection.
Do you provide chimney service at home?
Yes, our technicians visit your home to inspect, repair and service your kitchen chimney.
How can I book Faber chimney repair service?
You can book Faber Chimney Repair Service by calling 1800 210 2966 or messaging us on WhatsApp at 8104268556.
How can I contact Faber Appliance Repair?
You can reach us by phone (1800 210 2966), WhatsApp (8104268556), or through the contact form on this page.

Explore More

Scroll to Top