Faber Hob Not Igniting? Common Causes and Solutions

If your Faber hob is not igniting, you're not alone — it's one of the most common issues homeowners report with gas hobs. In most cases, the problem is linked to the ignition system, a dirty burner, moisture around the burner head, or an internal control issue. While some causes are minor and can be checked safely at home, others need a trained technician to inspect the appliance properly.

This guide walks you through the likely reasons your Faber hob won't light, the safe checks you can try yourself, and when it's time to call in a Faber hob repair service.

Quick Answer

A Faber hob usually fails to ignite due to a faulty ignition system (spark plug or igniter), a blocked or dirty burner cap, moisture near the burner, or an issue with the ignition switch or control board. Sometimes only one burner is affected, which usually points to a localised issue rather than a hob-wide fault. If basic cleaning and drying don't resolve it, the fault is likely internal and needs professional diagnosis.

Why Is My Faber Hob Not Igniting?

Gas hobs rely on a combination of a spark (from the igniter), a clean gas flow path, and a properly seated burner cap to light successfully. When any one of these is disrupted, the burner may not ignite at all, or it may click without lighting. Below are the most common causes, explained one by one.

1. Ignition System Problem

The ignition system generates the spark that lights the gas. If the igniter, spark plug, or ignition wiring is faulty, the burner may not receive a spark at all, or the spark may be weak and inconsistent.

Common symptoms:

• No spark or a very faint spark when you turn the knob
• Clicking sound is present, but no flame appears
• Ignition works only after several attempts

You can visually check if the spark electrode looks visibly damaged, corroded, or misaligned, but avoid trying to repair or replace ignition components yourself, as this involves gas and electrical parts.

2. Burner Cap or Burner Area Is Dirty

Food spills, grease, and residue can block the small gas outlet holes on the burner cap, preventing the flame from forming properly, even if the spark is working.

Safe cleaning advice:

• Switch off the hob and let it cool completely before cleaning
• Remove the burner cap carefully and check for visible residue
• Use a soft brush or toothpick to gently clear the outlet holes
• Wipe the cap with a dry cloth before placing it back correctly

Make sure the cap is seated in its correct position and orientation, as a misaligned cap is a common reason ignition doesn't work even after cleaning.

3. Moisture Around the Burner

Spilled water, cleaning liquid, or condensation around the burner head can temporarily interfere with the spark, even if the ignition system itself is working fine.

If you've recently washed the hob or spilled liquid nearby, allow the burner area to dry completely — ideally for 20–30 minutes — before attempting to ignite it again. Avoid using a flame or heat source to speed up drying.

4. Ignition Clicking but Burner Is Not Lighting

If you hear the ignition clicking but the burner still doesn't light, this usually points to one of a few possibilities:

• Low or inconsistent gas supply reaching the burner
• Burner cap not seated correctly, disrupting gas flow
• Blocked burner openings preventing gas from escaping properly
• An ignition-related fault where the spark isn't reaching the gas at the right point

Do not attempt to dismantle the gas line, valve, or internal gas components yourself. These checks should only involve the burner cap and external cleaning — anything beyond that needs a qualified technician.

5. No Clicking Sound From the Ignition

If there's no clicking sound at all when you turn the knob, the issue is more likely electrical or related to the ignition switch or control module rather than the gas supply.

Safe checks you can perform:

• Check if the hob has power where applicable (for hobs with electronic ignition)
• Check if batteries are used for ignition and inspect them for visible corrosion or looseness, if your model uses replaceable batteries
• Confirm the knob is turning and clicking into the ignition position properly

If there's still no response after these checks, the fault is likely internal and shouldn't be opened up without professional help.

6. One Burner Is Not Igniting

When only one burner is affected while the others work normally, the cause is usually localised to that specific burner — such as a blocked cap, a misaligned burner head, or a faulty individual spark plug for that burner.

This is a good sign in one way: it usually rules out a wider issue like the main control board or gas supply. Try cleaning and repositioning that specific burner cap first before assuming a bigger fault.

7. Faber Hob Ignition Stops Working Repeatedly

If ignition works sometimes and fails other times — or the problem keeps coming back after cleaning — this pattern usually indicates a developing internal fault, such as a worn-out igniter, a loose connection, or a control-related issue.

Repeated, intermittent failures are best diagnosed by a technician rather than repeatedly attempting workarounds, since the exact component at fault can only be confirmed after a proper inspection.

If You Smell Gas

If you notice a gas smell near the hob at any point: stop using the appliance immediately, avoid lighting flames, sparks, or switching electrical points on or off nearby, ventilate the kitchen if it is safe to do so, and contact a qualified gas service professional right away. Do not attempt to inspect or fix the appliance yourself in this situation.

For general LPG safety practices at home, you can also refer to this LPG safety guide.

Safe Checks Before Calling a Hob Repair Technician

• Check whether the appliance has power, where applicable
• Check whether the burner cap is correctly positioned and seated
• Clean visible food residue around the burner once the hob has cooled down
• Make sure the burner area is completely dry before trying to ignite
• Note whether the issue affects one burner or all burners
• If there is a gas smell, stop using the hob and seek qualified help immediately

When Should You Call a Faber Hob Repair Technician?

It's time to bring in a professional if you notice any of the following:

• The hob still doesn't ignite after completing the basic safe checks above
• There's no clicking sound from the ignition at all
• Ignition failure keeps repeating even after cleaning
• One or more burners aren't working
• Ignition works only intermittently or inconsistently
• You suspect a control or ignition switch problem
• You notice any unusual smell or abnormal operation from the hob

Keep in mind that the exact fault can only be confirmed after a proper inspection — no two ignition faults are identical, and not every Faber hob model uses the same internal ignition components. For a reliable diagnosis, it's best to get an experienced Faber hob repair service to inspect the appliance at your home.

You can also check our FAQ page for more general appliance repair questions before booking a visit.

Why Homeowners Choose an Independent Faber Hob Repair Service

Faber Appliance Repair is an independent appliance repair service — we are not an authorised or official Faber service centre. We offer doorstep diagnosis and repair for Faber hobs, subject to service location and the nature of the fault. Our technicians inspect the ignition system, burner condition, and control components on-site to identify the actual cause before recommending a repair.

If your hob's ignition issue isn't resolving with basic checks, a proper Faber hob repair service at home is usually the fastest way to get it working safely again.

Related Faber Appliance Repair Services

• Faber Chimney Repair Service
• Faber Cooking Range Repair Service
• Faber Built-in Oven Repair Service
• Faber Microwave Repair Service
• Faber Dishwasher Repair Service

Need Help With Your Faber Hob?

If your Faber hob is not igniting, you can contact Faber Appliance Repair for independent doorstep repair/service, subject to your service location and appliance fault.

Call: 1800 210 2966
WhatsApp: 8104268556
Or reach out via our Contact page

Frequently Asked Questions

Why is my Faber hob not igniting?

The most common reasons are an ignition system fault, a dirty or blocked burner cap, moisture around the burner, or an internal control issue. The exact cause can only be confirmed after inspection.

Why is my Faber hob clicking but not lighting?

This can happen due to low gas flow, a misaligned burner cap, blocked burner openings, or a spark that isn't reaching the gas correctly. Avoid dismantling gas components yourself — a technician can safely diagnose this.

Why is there no clicking sound from my Faber hob?

No clicking usually points to an electrical, battery, or ignition switch issue rather than a gas-related problem. Check power supply and battery condition first, where applicable.

Why is only one Faber hob burner not igniting?

This is usually localised to that burner — such as a blocked cap or misaligned burner head — rather than a hob-wide fault. Try cleaning and repositioning that specific burner first.

Can a Faber hob ignition problem be repaired?

In most cases, yes. Ignition issues are commonly repairable once the exact cause is identified through inspection. Repair outcomes depend on the specific fault and appliance condition.

What should I do if my hob has a gas smell?

Stop using the hob immediately, avoid flames or sparks, ventilate the kitchen if safe, and contact a qualified gas service professional right away. Do not try to inspect it yourself.

When should I call a Faber hob repair technician?

Call a technician if the hob doesn't ignite after basic checks, there's no clicking sound, ignition fails repeatedly, one or more burners aren't working, or you notice unusual smells or behaviour.

Is Faber Appliance Repair an authorised Faber service centre?

No. Faber Appliance Repair is an independent appliance repair service and is not affiliated with or authorised by Faber. We provide doorstep repair as a third-party service provider.