Faber Dishwasher Not Draining Water? Causes and Checks

Faber dishwasher not draining water is a common complaint. You finish a wash cycle, open the door and find a pool of dirty water at the bottom, and it is usually easier to sort out than it looks.

The cause is often something simple, like a clogged filter or a bent hose. Sometimes it points to a fault with the drain pump or the way the machine was connected during installation. This guide explains the likely causes, the safe checks you can do yourself, and when it is better to call a technician.

Why Is My Dishwasher Leaving Water at the Bottom?

A dishwasher fills with water, sprays it over the dishes, and then pumps the dirty water out through a drain hose into your sink pipe or drain point. If any part of that path is blocked, weak or badly connected, water stays behind.

A little moisture near the bottom of the tub can be normal in some models. Standing water that stays after the cycle ends, or that smells bad, is a sign of a dishwasher drainage problem. Your user manual will tell you what is normal for your model.

Common Causes of a Faber Dishwasher Drainage Problem

1. Clogged dishwasher filter

Most dishwashers have a filter at the base of the tub that catches food particles before they reach the pump. In Indian kitchens, rice grains, dal, oil, masala residue, tea leaves and small bits of vegetable collect there quickly. Once the filter clogs, water cannot pass through properly and drains slowly or not at all.

This is the most common reason for a Faber dishwasher water not draining and the first thing to check.

2. Food debris inside the filter and drain area

Even with a clean filter, debris can settle in the area underneath it. Small items like seeds, toothpick pieces, label fragments, broken glass or a stray piece of foil can block the drain opening. Oily buildup can also coat the inside of the drain path and narrow it over time.

3. Blocked or kinked drain hose

The drain hose carries water from the dishwasher to your sink pipe or drain point. If the hose is bent behind the machine, squeezed against the wall or crushed under the unit, water flow is restricted. Grease and food residue can also form a blockage inside the hose.

This often happens after a dishwasher is moved for cleaning, or when a new kitchen cabinet or platform is fitted around it.

4. Drain pump problem

The drain pump pushes water out of the machine. If it is jammed by debris, worn out or not receiving power properly, the water will not leave the tub. Signs of a pump problem include:

A humming sound at the end of the cycle with no water leaving
No sound at all when the machine should be draining
Water that drains only partly
A repeating error or fault indication

A pump involves electrical parts, so this is not a do-it-yourself repair.

5. Drain connection issue

The hose connects to your sink outlet or a drain pipe. If the sink trap is blocked, or the connection point is partly clogged with kitchen waste, water may back up into the dishwasher or fail to leave it. If water rises in the kitchen sink while the dishwasher drains, the problem is probably in the household drain and not in the machine.

6. Improper dishwasher installation or drain connection

Sometimes the problem starts on day one. A hose fitted too low, too tightly bent, or connected with the wrong fitting can cause poor drainage. In some homes the dishwasher shares its drain line with the sink or another appliance, which can also cause slow draining or backflow. If the drainage problem began soon after installation or after the kitchen was renovated, the connection deserves a proper inspection.

What to Check When Your Faber Dishwasher Is Not Draining

Try these basic checks in order. Do not force any part or open anything that needs tools beyond the normal removal of the filter.

Safety first: Switch off the dishwasher and unplug it, or turn off the power at the wall switch or MCB, before you inspect anything. Keep your hands dry, and do not touch the socket or wiring with wet hands. If the area around the plug is wet, stop and call a technician.

Cleaning the filter of a Faber dishwasher to fix a drainage problem

Faber Dishwasher Drainage Troubleshooting Checklist

Look at the tub. Check how much water is left and whether it looks greasy or has a bad smell. Remove any large food pieces or loose items you can see.
Clean the filter. Take out the filter as shown in your user manual, rinse it under running water, and use a soft brush to remove oil and residue. Avoid sharp tools and harsh scrubbing.
Check the area under the filter. Remove visible debris from the drain opening by hand or with a soft cloth. Be careful of broken glass or sharp objects.
Inspect the drain hose. Look at the hose behind or beside the machine where it is accessible. Make sure it is not bent, pinched or flattened, and straighten it gently if it is kinked. Do not pull the machine so hard that the hose or power cord gets strained.
Check the sink. Run water in the kitchen sink. If it drains slowly, the blockage may be in the sink pipe or trap, not in the dishwasher.
Remove standing water safely. If water remains, scoop it out with a cup and a sponge before restarting, so that you can tell whether the next cycle drains properly.
Restart with a short cycle. Reconnect the power and run a short rinse cycle. Watch whether the water drains at the end.

Checking the drain hose of a Faber dishwasher for kinks or blockage

Habits that help prevent drainage problems

Scrape plates and remove bones, seeds and large leftovers before loading.
Rinse the filter every week or two, and more often if you cook oily food daily.
Use a detergent and rinse aid suited to dishwashers, and avoid using too much.
Run a maintenance or hot cycle occasionally to clear grease.
Keep the drain hose free of bends when the machine is moved or cleaned.

When Should You Call a Dishwasher Repair Technician?

Basic cleaning solves many cases of Faber dishwasher not draining water, but some faults need a professional inspection. It is best to stop and book a technician when:

The water remains even after you clean the filter and check the hose
You hear humming, grinding or clicking from the pump area, or the machine is silent when it should be draining
The same error or fault indication keeps returning
There is any leakage near the base, the plug, or the control panel
The dishwasher trips the power supply or shows signs of burning or a hot smell
The problem started right after installation or a kitchen renovation
You are unsure how to remove a part safely

Please do not open electrical panels, test wiring or replace the pump yourself. Water and electricity are a dangerous combination, and a wrong move can damage the machine or hurt you. A trained technician can test the pump, check the drain path and correct the connection safely.

If you want a professional to look at it, you can read about our Faber dishwasher repair and service or explore the wider range of Faber appliance repair services we handle for kitchen appliances.

Service Areas

Faber Appliance Repair provides Faber dishwasher and kitchen appliance repair across India. Whichever city you are in, you can book a visit by phone or WhatsApp. Here are our city pages:

If your city is not listed, call or WhatsApp us with your pin code and we will tell you about service in your area.

Frequently Asked Questions

Why is my Faber dishwasher not draining water?

The most common reasons are a clogged filter, food debris around the drain area, a kinked or blocked drain hose, a weak drain pump, or a poor drain connection at the sink. Checking the filter and hose is a good first step.

Is it normal for a little water to remain at the bottom of a dishwasher?

A small amount of water near the base can be normal in some models. If you see visible standing water after the cycle ends, or it smells, there is likely a drainage problem. Your user manual will tell you what is normal for your dishwasher.

How often should I clean the dishwasher filter?

A good habit is to check it every week or two, and more often if you do not scrape plates before loading. Your manual may give guidance specific to your model.

Can I repair the drain pump myself?

No. The drain pump has electrical parts, so it should be checked by a trained technician. Basic filter cleaning and a visual hose check are reasonable to do at home after switching off the power.

Can a blocked kitchen sink cause a dishwasher drainage problem?

Yes. If the dishwasher drains into the sink pipe or a shared drain line, a blockage there can stop the water from leaving the machine or push it back into the tub.

When should I call a repair technician?

Call one if water remains after you clean the filter and check the hose, if you hear unusual sounds from the pump, if an error keeps returning, if there is any leakage, or if you are unsure about the installation.

Does Faber Appliance Repair service dishwashers?

Yes. Faber Appliance Repair is an independent repair service that provides Faber dishwasher repair and other Faber kitchen appliance repair across India. You can call 1800 210 2966 or message us on WhatsApp at 8104268556.

Conclusion

A dishwasher that will not drain is frustrating, but the cause is often a dirty filter, a bent hose or a blocked sink pipe. Switch off the power, work through the checklist above, and you may solve it in a few minutes. If the Faber dishwasher not draining water problem continues after these checks, or you notice noises, leaks or repeated errors, it is safer to have it inspected than to keep running it.

If your Faber dishwasher needs attention, the team at Faber Appliance Repair can help. Call 1800 210 2966 or WhatsApp 8104268556 to book a visit. You can also use our contact and booking page.

Faber Dishwasher Not Draining Water

On This Page